Fittings & Accessories

King Combination Nipples, 1/2 in x 1/2 in (NPT) Male, Stainless SteelFeaturesRecommended for low-pressure discharge and suction service for compatible liquidsWorking pressure may vary with the construction of the hose, the type of clamping system used...

Andrews Type D Cam and Groove Couplers, 4 in (NPT) Female, AluminumFeaturesSupplied standard with a Buna-N gasketPrecision machined to rigid tolerancesStainless pins will not rust or bind, providing great strength and safetyRecess holds gasket firmly in...

Global Type A Adapters, 2 in (NPT), 316 Stainless SteelFeaturesBuna seals are standard in all couplersGlobal cam and groove are intended for the transfer of products such as water and sewage in non-critical applications in the agricultural and...

Global Type F Adapters, 1 1/2 in, Male/Male, AluminumFeaturesTo make a connection, simply slide the adapter into the coupler and with normal hand pressure, press the cam levers downUncoupling is as quick and simple as coupling - Just lift the cam arms...

Boss Stems, 3/8 in x 3/8 in (NPT) Male, SteelFeaturesUniversally recommended for steam hose connectionsWidely used for air, water, fluid petroleum, chemicals and liquid petroleum gas up to 1 in IDCan be applied to many types of rubber, synthetic,...

Dix-Lock Quick Acting Couplings, 1/2 in (NPT), Male/Male (NPT)Features

3500 Series Steel Nipples, 1/4 in x 1/4 in (NPT) Male, SteelFeaturesWorking pressure: 600 PSI at ambient temperature 70°FConnects air hose and air tool to construct a whip hose that can protect against coupling breakage and related hazards

Global Type DC Dust Caps, 6 in, AluminumFeaturesBuna seals are standardPressure rating for adapters is based on the seal of the mating part

Boss-Lock Type D Cam and Groove Couplers, 2 1/2 in (NPT) Female, AluminumFeaturesFeature safety clipsCouplers are supplied standard with a Buna-N gasket

Brass Short Shank Fittings, 3/4 in x 3/4 in, MaleFeatures

Dix-Lock Quick Acting Couplings, 3/8 in, BrassFeatures

Dual Lock Quick Acting Couplings, 1/2 in, HoseFeatures

Boss Ground Joint Seals, 1 inFeaturesPositive metal-to-polymer sealLeakproof seal forms when the metal head of the stem makes contact with the patented polymer seat in the spudRecommended for steam service up to 450°FEasy to sealUse with Boss Clamps

Global Type DC Dust Caps, 2 in, AluminumFeaturesBuna seals are standardPressure rating for adapters is based on the seal of the mating part

In-Line Lubricators, 1/2 in (NPT), FemaleFeatures

Boss Hose Menders, 3/4 in x 3/4 in Male, Malleable IronFeaturesCollars engage gripping fingers of Boss clampsDesigned for worn out hose couplings