Fasteners, Clamps & Straps

HS Series Worm Gear Clamp, 2-1/16 in to 3 in Hose OD, 1/2 in W, Stainless Steel, Chrome Zinc-Plated SteelFeaturesFour-piece constructionMaximum recommended torque 50 in·lb

Double Bolt Hose Clamps, 3 1/4"-3 1/2" Hose OD, Malleable Iron, 20/BxFeaturesInner surface has dual gripping ridgesBolt lugs are reinforced to prevent bending out of alignmentTorque values for clamps are based on dry boltsThe use of lubricant on bolts...

Lok-Bolt AS® Hex Nut Sleeve Anchor, 1-1/2 in x 3-3/4 in; Carbon SteelFeaturesVersatile – can be used for solid and hollow concrete or masonry applicationsDesigned to allow fixture to draw snug against the base material during tighteningPreassembled...

HS Series Worm Gear Clamp, 9/16 in to 1-1/16 in Hose OD, 1/2 in W, Stainless Steel, Chrome Zinc-Plated SteelFeaturesFour-piece constructionMaximum recommended torque 50 in·lb

UV Stabilized Cable Tie, 50 lb Tensile Strength, 7.6 in L, Black, 100 EA/BGFeaturesGeneral purpose useNylon 6/6 features light weight, high strength and a wide temperature rangeContains increased resistance to UV light (does not totally eliminate the...

General Purpose Cable Tie, 50 lb Tensile Strength, 14.6 in L, Orange, 100 EA/BGFeaturesNylon 6/6 features light weight, high strength and a wide temperature rangeEven at higher than recommended temperatures or exposure to flame, nylon does not give off...

CP Series Center Punch Clamps, 4 1/2 Dia, 5/8" Wide, Galvanized Carbon SteelFeaturesLock with impact from a hammer using a conical punchDouble-wrapped for additional strengthNot recommended for use with fittings that may crack as a result of impact

CP Series Center Punch Clamps, 6 in Dia, 5/8 in Wide, Galvanized Carbon SteelFeaturesLock with impact from a hammer using a conical punchDouble-wrapped for additional strengthNot recommended for use with fittings that may crack as a result of impact

BAND-FAST Ready to Use Bands, 3/4 in, 48 in, 0.03 in, Stainless SteelFeaturesBAND-FAST® is a ready-to-use bandPre-assembled and pre-cut product helps saves on time and labor costs

Power-Stud®+ SD1 Wedge Expansion Anchor, 3/8 in x 2-1/4 in, Carbon SteelFeaturesConsistent performance in high and low strength concreteNominal drill bit size is the same as the anchor diameterAnchor can be installed through standard fixture holesAnchor...

2-Ear Zinc-Plated Hose Clamp, 1 in OD, 0.886 in-1.063 in dia, 0.394 in WFeaturesCompact one-piece clamp for robust, secure connectionsFast and simple installation, visible deformation provides evidence of proper closureDeburred edges reduce risk of...

Ultra-Lok Free End Bands, 3/4 x 68 in, 0.03 in Thick, Stainless SteelFeaturesDesigned for quick installation, highest clamping force and gap-free inner diameterA great choice for demanding applicationsApply three to five times faster than band and buckle...

Power-Stud®+ SD1 Wedge Expansion Anchor, 1/4 in x 3-1/4 in, Carbon SteelFeaturesConsistent performance in high and low strength concreteNominal drill bit size is the same as the anchor diameterAnchor can be installed through standard fixture holesAnchor...

54 Series Worm Drive Clamp, 2 3/4" Hose ID, 1 5/8-3 1/2"Dia, 201/301 Stnls SteelFeaturesFeature an exclusive safety collared deep slotted screw design that prevents screwdrivers from slipping and puncturing the hose wallCombo-Hex clamps can be installed...

Lok-Bolt AS® Hex Nut Sleeve Anchor, 3/4 in x 6-1/4 in, Carbon SteelFeaturesVersatile – can be used for solid and hollow concrete or masonry applicationsDesigned to allow fixture to draw snug against the base material during tighteningPreassembled anchor...

Ultra-Lok Free End Bands, 3/4 x 44 in, 0.03 in Thick, Stainless SteelFeaturesDesigned for quick installation, highest clamping force and gap-free inner diameterA great choice for demanding applicationsApply three to five times faster than band and buckle...