Ductwork

DUCTING EASILY CONVERTS BLOWER FAN (SOLD SEPARATELY) TO AN EXHAUST FAN WITH CONVENIENT FLEXIBLE DUCTING. DUCTS INCLUDE QUICK-CONNECT COUPLING FOR EASY BLOWER ATTACHMENT. DUCTS ARE MADE WITH 2-PLY REINFORCED POLYVINYL THAT IS FLAME RETARDANT AND...

THERMAFLEX S-LP-10 NON-INSULATED FLEX DUCTS ARE IDEAL FOR LOW MEDIUM PRESSURE HEATING AND COOLING SYSTEMS WHERE INSULATED DUCTS ARE NOT REQUIRED. THESE HVAC DUCTS FEATURE A STRONG WOVEN FIBERGLASS FABRIC WITH A FLAME RETARDANT COATING THAT IS BONDED TO...

THERMAFLEX M-KE HVAC DUCTS HAVE A VINYL COATED SPRING STEEL WIRE COIL CONSTRUCTION THAT IS IDEAL FOR LOW MEDIUM PRESSURE HEATING AND COOLING ENVIRONMENTS. THESE HIGHLY EFFICIENT FLEX DUCTS FEATURE A CORE THAT IS BONDED TO THE STEEL WIRE COIL TO SUPPORT...

TOP-QUALITY THERMAL M-KC HVAC DUCTS ARE IDEAL FOR AIR VENTING AND DRYING APPLICATIONS. THESE HIGH-PRESSURE SPIRAL DUCTS CAN BE USED FOR ANY LOW TO HIGH PRESSURE HEATING AND COOLING SYSTEMS. DUCTS FEATURE A STRONG WOVEN FIBERGLASS FABRIC CORE THAT IS...

MADE IN THE USA NORDFAB QF REDUCERS PROVIDE EASY TRANSITION FROM ONE SIZE OF DUCT PIPE OR FITTING TO A SMALLER SIZE. WHEN ORDERING REDUCERS SPECIFY DIMENSIONS OF BOTH A AND B ENDS. PRICED BY LARGE END A. THE B END CAN BE AS SMALL AS 1. ALSO SPECIFY...

MADE IN THE USA DUCT ELBOWS ALSO REFERRED TO AS BENDS ALLOW AIRFLOW DIRECTION CHANGE IN A LINE OF DUCT. STANDARD NORDFAB QF ELBOWS ARE AVAILABLE IN 90° 60° 45° AND 30° IN GALVANIZED OR STAINLESS STEEL (SPECIFY IF SS) WITH QUICK-FIT ROLLED ENDS...

MADE IN THE USA DUCT ELBOWS ALSO REFERRED TO AS BENDS ALLOW AIRFLOW DIRECTION CHANGE IN A LINE OF DUCT. STANDARD NORDFAB QF ELBOWS ARE AVAILABLE IN 90° 60° 45° AND 30° IN GALVANIZED OR STAINLESS STEEL (SPECIFY IF SS) WITH QUICK-FIT ROLLED ENDS...

US DUCT'S ADJUSTABLE SLEEVE IS USED TO MAKE ADJUSTMENTS TO THE LENGTH OF DUCT. SIMPLY CUT THE DUCT TO THE DESIRED LENGTH AND SLIDE IT INTO THE 11"" SLEEVE AND USE THE INCLUDED O-RING TO MAKE THE CLAMP TOGETHER CONNECTION.

US DUCT PROVIDES DUCT ELBOWS THAT FIT EVERY APPLICATION FROM OUR STANDARD SEGMENTED/GORED ELBOWS TO ONE PIECE LIGHT GAUGE ECONOMICAL ELBOWS FOR LIGHT DUST COLLECTION TO AIR TIGHT ELBOWS FOR WET APPLICATIONS TO HEAVY GAUGE WELDED ELBOWS FOR ABRASIVE...

STANDARD BRANCHES HAVE ONE ""LEG"" COMING OFF OF THE MAIN LINE AT EITHER A 45 DEGREE OR 30 DEGREE ANGLE FOR OPTIMAL AIR FLOW. BRANCHES ARE CONSTRUCTED OF 18 GAUGE STEEL WHICH ALLOWS US TO SOLID WELD THE BRANCHING PART TO THE TRUNK TO ENSURE A VERY TIGHT...

DOUBLE BRANCHES HAVE TWO ""LEGS"" COMING OFF OF THE MAIN LINE AT EITHER A 45 DEGREE OR 30 DEGREE ANGLE FOR OPTIMAL AIR FLOW. BRANCHES ARE CONSTRUCTED OF 18 GAUGE STEEL WHICH ALLOWS US TO SOLID WELD THE BRANCHING PARTS TO THE TRUNK TO ENSURE A VERY TIGHT...

MADE IN THE USA NORDFAB QF REDUCERS PROVIDE EASY TRANSITION FROM ONE SIZE OF DUCT PIPE OR FITTING TO A SMALLER SIZE. WHEN ORDERING REDUCERS SPECIFY DIMENSIONS OF BOTH A AND B ENDS. PRICED BY LARGE END A. THE B END CAN BE AS SMALL AS 1. ALSO SPECIFY...

MADE IN THE USA DUCT ELBOWS ALSO REFERRED TO AS BENDS ALLOW AIRFLOW DIRECTION CHANGE IN A LINE OF DUCT. STANDARD NORDFAB QF ELBOWS ARE AVAILABLE IN 90° 60° 45° AND 30° IN GALVANIZED OR STAINLESS STEEL (SPECIFY IF SS) WITH QUICK-FIT ROLLED ENDS...

US DUCT PROVIDES DUCT ELBOWS THAT FIT EVERY APPLICATION FROM OUR STANDARD SEGMENTED/GORED ELBOWS TO ONE PIECE LIGHT GAUGE ECONOMICAL ELBOWS FOR LIGHT DUST COLLECTION TO AIR TIGHT ELBOWS FOR WET APPLICATIONS TO HEAVY GAUGE WELDED ELBOWS FOR ABRASIVE...

MADE IN THE USA NORDFAB'S FLEXIBLE RIGID STEEL HOSE IS FOR APPLICATIONS INVOLVING HIGHER TEMPERATURES OR ABRASIVE MATERIAL. AVAILABLE IN GALVANIZED OR STAINLESS STEEL. 1.5 6 CAN BE SOLD IN 5' INCREMENTS OF UP TO A 25' MAXIMUM LENGTH. 7 14 ARE SOLD IN...

MADE IN THE USA NORDFAB'S QUICK-FIT (QF) PIPE CLAMPS TOGETHER IN SECONDS WITHOUT WELDS BOLTS SCREWS FLANGES SPECIAL TOOLS PRECISE MEASUREMENTS OR SPECIALIZED SKILLS. IT CUTS INSTALLATION AND DUCTING-RELATED DOWNTIME BY MORE THAN 40 OVER TRADITIONAL...