Die & Mold Components

Mold Blank, Punch & Die Sets; Guide Post Length (Inch): 6 ; Die Holder Thickness (Inch): 13/16 ; Material: Cast Iron ; Overall Depth (Inch): 3-3/4 ; Post Center To Front (Inch): 2 ; Bushing Length (Inch): 2-1/2

Mold Blank, Punch & Die Sets; Die Width/Diameter Space (Inch): 8.5 in; Die Width/Diameter Space (Decimal Inch): 8.5000; Die Depth Space (Decimal Inch): 8.0000; Die Depth Space (Inch): 8 in; Guide Post Length: 6 in; Guide Post Length (Inch): 6; Die Holder

Mold Blank, Punch & Die Sets; Guide Post Length (Inch): 6-3/4 ; Die Holder Thickness (Inch): 1 ; Material: Cast Iron ; Overall Depth (Inch): 6 ; Post Center To Front (Inch): 3-1/4 ; Bushing Length (Inch): 2-1/2

Cast Aluminum Bronze Die & Mold Shoulder Bushing: 4-1/2" ID, 8" OAL 5-11/16" Bottom OD, 5-1/2" Top OD, 5-7/8" Collar OD, 3/8" Under Collar, 7-5/8" Above Collar

Mold Blank, Punch & Die Sets; Guide Post Length (Inch): 6-3/4 ; Die Holder Thickness (Inch): 1 ; Material: Cast Iron ; Overall Depth (Inch): 7 ; Post Center To Front (Inch): 3-1/2 ; Bushing Length (Inch): 2-1/2

Solid Mold Die Blanks & Punches

Die Spring: 2" Hole Dia, 1" Rod Dia, 4" Free Length, Yellow 3,034 lb Max Load Deflection, 1.3661" Max Deflection, Chromium Alloy Steel

Die Spring: 5/8" Hole Dia, 11/32" Rod Dia, 1" Free Length, Red 43.1 lb Max Load Deflection, 0.3" Max Deflection, Chromium Vanadium Steel

5/64" Head Diam, High Speed Steel Solid Mold Die Blank & Punch 1/16" Head Height

5/16" Inside x 7/16" OD, 5" OAL, Nitride Coated Die Steel, Die & Mold Ejector Sleeve 11/16" Head Diam, 1/4" Head Height, 45° Chamfer Angle, 3/64" Chamfer Length, 1/32" Corner Radius

Die Spring: 3/4" Hole Dia, 3/8" Rod Dia, 3" Free Length, Gold 306 lb Max Load Deflection, 0.9" Max Deflection, Chromium Alloy Steel

3/4" Inside x 1" OD, 7" OAL, Nitride Coated Die Steel, Die & Mold Ejector Sleeve 1-1/4" Head Diam, 1/4" Head Height, 45° Chamfer Angle, 3/64" Chamfer Length, 1/32" Corner Radius

Hard Core Pin: 7/64" Pin Dia, 6" OAL, Steel 1/4" Head Dia, 1/8" Head Height, 5-7/8" Pin Length

Die Spring: 40 mm Hole Dia, 20 mm Rod Dia, 125 mm Free Length, Brown 1,439 lb Max Load Deflection, 0.9843" Max Deflection, Chromium Alloy Steel

Die & Mold Ejector Blades; Blade Thickness (Decimal Inch): 0.0620 ; Blade Width (Decimal Inch): 0.2340

Die Spring: 2" Hole Dia, 1" Rod Dia, 8" Free Length, Green 1,154 lb Max Load Deflection, 4.8347" Max Deflection, Chromium Alloy Steel