Bonded Abrasives

Depressed Center Wheel, 5 in Dia, 1/8 in Thick, 24 Grit Alum. OxideFeaturesCuts faster, smoother and provides longer lifeZirconia grain provides high performance grinding and very long life

AZ Cool Blue Surface Grinding Wheels, Type 5, 14 X 1 1/2, 5" Arbor, 46, IFeaturesBond allows free cutting action while pulling heat away from the part and into the matrix of the wheelExcellent on materials 55RC and above but can also be used on general...

Tiger® Grinding Wheel, 9 in dia x 1/4 in Thick x 5/8 in-11 Arbor, 24 Grit, Zirconia Alumina/Ceramic, Type 28, 10 EA/BXFeaturesTriple fiberglass reinforcement provides added strength for aggressive stock removalType 27 grinding wheels are designed with...

Thin Cut-Off Wheel, 4 1/2 in Dia, 3/32 in Thick, 7/8 Arbor, 36 Grit Alum. OxideFeaturesProvides faster cutting, longer lifeProvides more strength than Quickie Cut™ wheels

Grinding/Cutting Wheel, 6 in Dia, 0.45 in Thick, A 46 U Grit Stainless SteelFeaturesHigh performance cutting, deburring and light grinding without the need to change wheelsConstructed with three full fiberglass layersDesigned for stainless steel,...

Premiere Red Stick-On Paper Roll, 4 1/4 X 10 Yd, P80FeaturesP-graded, heat-treated aluminum oxide abrasiveFull resin bond systemPressure sensitive adhesive (PSA) backingEasy to apply and removeConsistent scratch pattern and finish

Type 27 SG Pipeliner Grinding Wheel, 4-1/2 in dia, 1/8 in Thick, 24 Grit Aluminum OxideFeaturesReduced labor time and increased economic efficiency due to the high stock removal rateLong service lifeAlso suitable for low-powered angle grinders

Cut-Off Wheel, Gas Saws, 12 in Dia, 5/32 in Thick, 1 in Arbor, 24 GritFeaturesCan be used with both gas and electric high-speed machinesPremium grade aluminum oxide, reinforced resin bondingIdeal for fast cutting applications on metal and steel

Type 18 Gemini Plug Sq. Tip, 2in D, 4in Thick, 5/8-11 Arbor, 24 Grit Alum. OxideFeaturesMaximizes productivity and provides consistencyDesigned for hard-to-reach areas inside castings, removing flaws and cracks or removing metal in cornersUseful in...

Resin Cones and Plugs, Type 17, 1 1/2 in Dia, 3 in Thick, 5/8 Arbor, 24 GritFeaturesUsed for grinding and finishing metals in hard to reach areasSuitable for steel and other ferrous metalsSuperior performance and durability

Aluminum Cutting Wheels, 6 in Dia., 7/8 in Arbor, Type 1, 60 Grit, Alum. OxideFeaturesHigh performance cutting on aluminumBlend of abrasive grains with Weiler®'s non-loading formulaFast and consistent cut rate on aluminum

Resin Fiber Discs, 7 in Dia, 36 Grit, Alum OxideFeaturesAll purpose weld blending, grinding, surface preparation and finishing of metals, plastic, wood and fiberglassFiber-backed coated abrasive discFor use with right angle grinders

Gemini Mounted Points, 1 in Dia x 1 in Thick, A21, PFeaturesDesigned for cool cutting and minimal burnHigh temperature vitrified bond for exceptional form holding and lifeFor best performance, always run at the maximum allowable speedMaximum operating...

Green Silicon Carbide Surface Grinding Wheels, T1, 7 X 1/2, 1 1/4" Arbor, 60, IFeaturesThere are many applications in surface grinding, from heavy stock removal to a very precise finish and size requirementsSpecification GC80-I - Straight, Type 01

AZ Cool Blue Surface Grinding Wheels, Type 1, 12 X 1, 5" Arbor, 46, KFeaturesBond allows free cutting action while pulling heat away from the part and into the matrix of the wheelExcellent on materials 55RC and above but can also be used on general...

AZ Cool Blue Surface Grinding Wheels, Type 1, 14 X 1 1/2, 5" Arbor, 60, JFeaturesBond allows free cutting action while pulling heat away from the part and into the matrix of the wheelExcellent on materials 55RC and above but can also be used on general...