THE BLICKMAN 7971SS-1 (PAUL) INSTRUMENT AND SUPPLY CABINET PROVIDES MAXIMUM STORAGE ON FIVE POLISHED GLASS OR STAINLESS STEEL SHELVES. ADJUSTMENT OF SHELVES EVERY 1/2"". SLOPING TOP PREVENTS DUST COLLECTION. LOCKING DOOR LATCH SECURES CONTENTS. THREE-INCH SWIVEL CASTERS TWO WITH BRAKES. OPTIONAL STAINLESS STEEL DOORS GLIDES. MATERIALS STAINLESS STEEL TYPE 300 SERIES NICKEL-BEARING 1/4"" (0.64) CLEAR TEMPERED SHEET GLASS. GAUGES BODY OUTER DOORFRAMES AND SLOPING TOPS-18 GAUGE. DOOR INSERTS-20 GAUGE. LEGS-12 GAUGE. CONSTRUCTION CABINET CONSISTS OF A STORAGE COMPARTMENT WITH A SEAMLESS WELDED FACE DOUBLED FRONT EDGES AND A SLOPING TOP. CABINET IS MOUNTED ON FOUR OFFSET TYPE LEGS ON CASTERS WELDED INTO THE BOTTOM CORNER WITH COUNTERWEIGHT FASTENED UNDER THE BOTTOM REAR FOR DOORS IN OPEN POSITION. TWO GLASS-PANELED DOORS OF DOUBLE SHELL DESIGN FIT THE RABBETED FRAME OF THE CABINET AND HINGE ON THREE SEMI-CONCEALED STAINLESS STEEL HINGES EACH. OUTER FRAME IS ONE PIECE DIE FORMED TO RECEIVE A RUBBER GASKETED GLASS PANEL HELD IN PLACE BY REMOVABLE INTERIOR RETAINING STRIPS. RIGHT HAND DOOR IS FITTED WITH A LOCKING HANDLE AND THREE POINT LATCHING AND THE LEFT HAND DOOR WITH A DUMMY KNOB AND SPRING LOADED NYLON ROLLER CATCHES. CABINET INTERIOR CONSISTS OF EITHER FIVE GLASS SHELVES ADJUSTABLE IN 1/2"" INCREMENTS ON FULL-HEIGHT SLOTTED-SHELF STRIPPING WELDED TO THE REAR AND SIDE WALLS (PAUL MODELS ONLY) OR AN 18-GAUGE STAINLESS-STEEL FULL HEIGHT-AND-WIDTH PEGBOARD FASTENED TO THREE CHANNELS AND WELDED TO THE INSIDE BACK WALL (WALTER MODELS ONLY). WELDING WELDING IS ACCOMPLISHED BY HELI-ARC METHOD. ALL EXPOSED WELDS GROUND SMOOTH. FINISH EXPOSED SURFACES ARE FREE FROM PIT MARKS WELD SEAMS AND SCALE AND POLISHED TO A SATIN FINISH. CASTERS 3"" BALL BEARING SWIVEL TYPE. OPTIONS GLIDES STAINLESS STEEL SHELVES SOLID DOORS RECESSING FLANGES FOR BUILT-IN UNITS.
US Dollars
