BLACK BOX CORPORATION

Features five BNC connectors for RGB/RGBHV Component video input. Automatically detects VGA resolutions up to 1920 x 1200. Converts and scales analog VGA and RGB for output on a DVI-D display.

Also great for scaling PC video for demanding healthcare, university lab, or graphics studio uses. Controlled through USB, OSD, or push buttons. Ideal for integrating digital signage into an...

Works with solid or stranded cable FCC compliant, UL rated, and compliant with the Federal Trade Agreements Act (TAA) 50 Micron Gold Plated Contacts for optimal performance Ideal for unshielded...

Ideal for 1000BASE-T, 100BASE-TX, 10BASE-T and other high-speed applications Tested to exceed CAT5e industry standard of 100 MHz Cabling is ETL verified to ANSI/TIA-568-C2 Snagless boots prevent...

Guaranteed for life! Also available for 24in Elite Cabinets. Installs anywhere along the top of the cabinet. When mounted across the top front or rear of the cabinet, openings in the trough align...

Connect a DVI-I CPU to a ServSwitch. Each end of this cable has one DVI and one USB connector.

Hybrid cable design supports HD26 for the KVM Side, and the CPU side will support VGA & USB Used with the SW2006A, SW4006A, SW2009A, and SW4009A-USB-EAL Connect a VGA and USB Computer or Server to...

High-quality 23-AWG construction Aluminum Mylar tape with drain wire shield Foil shield protects against noise and EMI/RFI interference Meets TIA/EIA-568-C.2 Category 6, ISO/IEC 11801, UL 444,...

Guaranteed for life! Gray PVC jacket with metal (EMI/RFI) hoods. Has 115-ohm nominal impedance at 1 MHz or above. Crosses Pins 2 and 3 for RS-232 standards compliance. Ideal for AT-to-AT file...

Change layouts/graphical effects with drag-and-drop tools Stream dynamic RSS feeds from the Internet Handles unlimited zones for text and images and up to 15 zones for HTML Set up one or more...

Built-in Single Port KVM Switch, connect to a computer or front end an existing KVM Switch Support for DVI-D or VGA Video, with either USB or PS/2 Keyboard and Mouse 1RU Design with 17in Display...

Features dual redundant 115-230-VAC power supplies. Fits into a standard 19in rack to save space. Holds up to 14 FlexPoint media converters.

Remote loop capability for remote fiber testing and LEDs for status monitoring. Data rate up to 115.2 kbps Range of up to 30KM (18.6 MI.) at 115.2 kbps over MM fiber DCE/DTE switch for easy direct...

Holds up to 16 switch modules in a single chassis daisy chain up to 255 racks. Monitor and control access to networks remotely. Gang switch all ports or switch individual ports. Automate the...

Supports Gang Switching using an external +12 VDC signal or external remote contact switches. A key lock switch on the rack allows the user to enable or disable manual switching. Controller card...